Re: NEC-LIST:loaded dipoles

From: Chuck Counselman <ccc_at_email.domain.hidden>
Date: Sun, 3 Mar 2002 18:45:30 -0500

At 4:37 PM -0500 3/3/02, Robert Haviland wrote:
>A way to "broadband" an antenna is to shunt the feed point with a
>resistor, say 100 ohms for a dipole. The impedance presented doesnt
>stray too much over a wide range of frequencies. Of course the
>coupling efficiency to space does change, but this is not important
>if the ambient noise is greater than system noise.

Unless you're thinking of transmitting. -Chuck

-- 
The NEC-List mailing list <nec-list_at_gweep.ca>
http://www.gweep.ca/mailman/listinfo.cgi/nec-list

Received on Sun Mar 03 2002 - 18:48:41 EST

This message: [ Message body ]
Next message: Pat W: "NEC-LIST:Transmision line and current source"
Previous message: Robert Haviland: "NEC-LIST:loaded dipoles"
In reply to: Robert Haviland: "NEC-LIST:loaded dipoles"
Next in thread: Ian Roberts: "RE: NEC-LIST:loaded dipoles"

Contemporary messages sorted: [ by date ] [ by thread ] [ by subject ] [ by author ] [ by messages with attachments ]

This archive was generated by hypermail 2.2.0 : Sat Oct 02 2010 - 00:10:42 EDT