NEC-LIST: Help needed!

I have recently starded using NEC4WIN95VM.

CAN YOU HELP ME WITH THE FOLLOWING QUESTIONS?

1- How close the coordinates of two wires have to be so that the program
will treat them as touching (connected)?
For example, if

Wire 1 X1=0, Y1=0, Z1=-1, X2=0, Y2=0, Z2=1
Wire 2 X1=0, Y1=0, Z1=1.00001, X2=0, Y2=0, Z2=2

are these wires connected at X=0, Y=0 Z=1 ?

2- When trying to taper the diameter on a 2m long wire from .002m to
.001m using the taper function I got a TOO DRASTIC TAPER message.
What are the guidelines for tapering?

3- How do I innicialise a given number of segments so that all wires
will have the same number
without having to type the segment number for each wire?

4-How can I read the numerical (magnitude and phase) values of the
currents on each segment?

Thanks

Panicali

-- 
The NEC-List mailing list <nec-list_at_gweep.ca>
http://www.gweep.ca/mailman/listinfo.cgi/nec-list