NEC-LIST: connecting wires to real ground in NEC2

From: Trinkle, Joe <JTrinkle_at_email.domain.hidden>
Date: Mon, 19 Apr 1999 11:44:40 +1000

Hi,

Can anyone help?

I'm trying to model the current distribution over a horizontal wire
above lossy ground. The horizontal wire needs to be terminated at
either end by vertical risers connecting to lossy ground. Is it
possible to model such a lossy transmission line in NEC2? Is one
allowed to make a direct wire connection to lossy ground?

Thanks
Joe Trinkle
Received on Tue Apr 20 1999 - 05:55:47 EDT

This message: [ Message body ]
Next message: John Belrose: "Re: NEC-LIST: connecting wires to real ground in NEC2"
Previous message: Harry Green: "NEC-LIST: A question about yagis raised by Zvi Frank"
Next in thread: John Belrose: "Re: NEC-LIST: connecting wires to real ground in NEC2"
Maybe reply: John Belrose: "Re: NEC-LIST: connecting wires to real ground in NEC2"
Maybe reply: George Hagn: "Re: NEC-LIST: connecting wires to real ground in NEC2"

Contemporary messages sorted: [ by date ] [ by thread ] [ by subject ] [ by author ] [ by messages with attachments ]

This archive was generated by hypermail 2.2.0 : Sat Oct 02 2010 - 00:10:39 EDT